Dynamic Systems is located in the heart of New York's "Tech Valley"

Whether you come to visit or are considering relocating to the area, we're confident you'll fall in love with all that our region has to offer.

Tech Valley is a 19-county region of eastern New York state that spans from just south of Montreal to just north of New York City. The area encompasses the Capital Region and parts of the Adirondacks/North Country, Hudson Valley and Mohawk Valley. To learn more about the impressive attributes of this region, please visit www.TechValley.org, a site dedicated to showcasing the region. Throughout the site, you'll learn more about how the unique resources of each of these areas contribute to Tech Valley's opportunities and excitement.

You’ll find a richness and diversity in the people and places of Tech Valley. People from across the country and around the world are relocating to the region to take advantage of our growing career possibilities, educational opportunities and incredible quality of life.

The geography ranges from mountain peaks to river valleys, from rolling hills to grassy plains. And you’ll experience the joys of all four seasons here in Tech Valley.

ICACC - January 28 - 29, 2025 - Daytona Beach, Florida, USA

We’re thrilled to be attending the 49th International Conference and Expo on Advanced Ceramics and Composites (ICACC) in January 2024. Be sure to visit us at the event, where we’ll be unveiling an exciting new product that you won’t want to miss! Register here

TMS - March 23-27, 2025 - Las Vegas, Nevada, USA

This year at the MGM Las Vegas Hotel & Casino, the DSI team witll be attending the TMS Annual Meeting & Exhibition brings together more than 4,000 engineers, scientists, business leaders, and other professionals in the minerals, metals, and materials fields for a comprehensive, cross-disciplinary exchange of technical knowledge. Learn More Here

Damien Fabrègue

The Institut National des Sciences Appliquées (National Institute of Applied Science) de Lyon, Villeurbanne, France

"...this is the only piece of equipment that I can do everything with. I can always do what I want. It may take some time to optimize the work, but in the end, you can always run the experiment or do the simulation that you wanted to do."

Dr. Brian Damkroger

Los Alamos National Laboratory

"Only the Gleeble is fast enough to allow us to physically simulate the thermal profile of electron beam welding”

Chihiro Kasamatsu

Material Evaluation Department Aichi Steel Corporation

“…we are concentrating on testing with the Gleeble to reduce costs in our forging production processes…”

Dr. Luis A. Colembergue Klujszo

Gerdau Aços Especiais Piratini

"Through the capability of simulating large scale, expensive processes in a small scale, laboratory environment, the Gleeble has made it easier for Gerdau to improve products and processes. Furthermore, all the controls available in the equipment bring a whole lot of reliability to the results, making the conclusions very sound."

Dr. Hans Peter Schmitz

ThyssenKrupp Stahl

“ In our labs, we do physical simulation… We try to reproduce as precisely as possible what is going on in the actual production lines. If you do it very carefully, you can transfer the result into the production lines, and you can use the results for building up numerical models."

Dr. Leijun Li

Utah State University

"On the Gleeble we can not only control all the mechanical properties, but we’re in command of the thermal properties and the atmosphere. With the Gleeble, we can do complicated applications, watch what is happening, see the effect of temperature, and know how much energy is going in. It would take a lot more time and money to do it with equipment other than the Gleeble."

Dr. Hirowo Suzuki

Nippon Steel (retired)

“In my opinion, Dynamic Systems is the top company in this kind of test equipment… worldwide.”

Dr. Mahesh Chaturvedi, Ph.D., FASM

University of Manitoba, Department of Mechanical and Manufacturing Engineering

“We want to understand what the fundamental causes for thermo-mechanical fatigue are, so we use the Gleeble to apply load and temperature, sometimes in sync and sometimes out of sync. The Gleeble can keep going for days, executing the same program again and again... it gives us excellent reproducibility.”

Tom Schambron

Bluescope Steel

"…world research and innovation are cornerstones of our business - the Gleeble is key to meeting the objectives of BlueScope. It assists in product development and improvement—such as trialling new steel grades, processing parameters, and so forth—and in tracking and solving of quality issues."

Dr. David Matlock

Colorado School of Mines

"Flexibility is the key to our extensive use of the Gleeble. It helps us to get maximum productivity out of the work we do."

Dr. Arnold Marder

Energy Research Center, Lehigh University

“What we are aiming at is intelligent processing. That’s where the Gleeble gives us a tremendous advantage. By allowing us to carefully simulate and model thermal and mechanical processes”

Dr. Warren Poole

University of British Columbia

"We had to generate all the parameters and then to validate the predictions that the computer model made… The Gleeble played a central role in that project. We did austenite grain growth studies, double-hit compression tests to study recrystallization, and continuous cooling transformations, with and without compression."

Dr. John Bowker

Former Senior Research Scientist CANMET Materials Technology Laboratory (CANMET-MTL)

"The Gleeble is one of the most heavily used machines at our lab... We have used and continue to use it for a broad range of thermo-mechanical simulation procedures. These include: welding applied to shipbuilding, marine materials, offshore structures and pipelines; compression testing to characterize the flow stress behavior of steels and aluminum alloys: and in situ melting and solidification to understand the effects of residuals on hot ductility."

Dynamic Systems Inc. 323 NY 355 Poestenkill, NY 12140	Phone: +1(518) 283-5350 Fax: +1(518) 283-3160 Email: info@gleeble.com
DSI Privacy Policy \| DSI Cookie Policy

Dynamic Systems is located in the heart of New York's "Tech Valley"

ICACC - January 28 - 29, 2025 - Daytona Beach, Florida, USA

TMS - March 23-27, 2025 - Las Vegas, Nevada, USA

Gleeble systems have been trusted by leading industry, universities, and research institutions for over 60 years: