Contact Us

Dynamic Systems works with partners around the world to offer the world’s most advanced line of thermal mechanical physical simulators and testing equipment.

Our regional partners are an important resource for providing local expertise and support. For more information about any of our products or services, please contact the appropriate representative listed below or contact Dynamic Systems Inc. directly using the contact form below, emailing This email address is being protected from spambots. You need JavaScript enabled to view it. or by calling +1 (518) 283-5350.

Dynamic Systems Inc. is located in New York State, USA Time Zone: UTC/GMT -5 hours. General hours of operation are 7:30am to 5:00pm. (7:30 – 17:00)


United States and all other locations not listed below:		Dynamic Systems Inc. PO Box 1234 Poestenkill, NY 12140 Phone: +1 (518) 283-5350 Fax: +1 (518) 283-3160 Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Brazil:		Altmann S.A. Av. Nacoes Unidas, 13.771-Bl. 1-7o andar 04578-000 Sao Paulo SP Brazil Phone: +55 (11) 5507-3302 Fax : +55 (11) 5507-4196 Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

China:		Shanghai Sales and Service Office Room 1006, Jintiandi Building, 998 Renmin Road Huang Pu District Shanghai, P.R. China 200021 Phone: +021 6320-1985 Fax: +021 6320-2100 Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Korea:		Korea Kiyon Co., Ltd. RM #819, Dae Rung Techno-Town III 448, Gasan-Dong, Kum Cheon-Ku Seoul 153-023, Korea Phone +82 2 689 0008 Fax: +82 2 555 6095 Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

West-Central Europe Representative:		Advanced Materials Analysis P. O. Box 3751 7500 DT Enschede The Netherlands Phone +31-53-7114018 Email: This email address is being protected from spambots. You need JavaScript enabled to view it. Inventor / Designer of the Accelerated Creep Test on Gleeble Systems. Papers: > Simulative Accelerated Creep Test on Gleeble > Accelerated Microstructure Transformation Caused by Thermal-Mechanical Fatigue

India:		Dynamic Technology Systems 9, National Storage Building S.B. Marg, Mahim (West) Mumbai - 400016. India Phone: +91 222 4325906 Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Japan:		Japan Machinery Company JMC Hightech Center 2-4-12 Higashi Rokugo, Ota-Ku Tokyo 144-0046, Japan Phone: +81 03 3730-6061 Fax: +81 03 3730-3737 Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Russia:		Pruftechnik MT GmbH "Zwick Trading M" - For contracts in Rubles Gzhatskaya st., 9, 8H, St.Petersdburg, 195220, Russia Phone: +7 (812) 676-37-33 Fax: +7 (812) 676-37-34 Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

Dr. Hans Peter Schmitz

ThyssenKrupp Stahl

“ In our labs, we do physical simulation… We try to reproduce as precisely as possible what is going on in the actual production lines. If you do it very carefully, you can transfer the result into the production lines, and you can use the results for building up numerical models."

Dr. David Matlock

Colorado School of Mines

Flexibility is the key to our extensive use of the Gleeble. It helps us to get maximum productivity out of the work we do

Dr. Mahesh Chaturvedi, Ph.D., FASM

University of Manitoba, Department of Mechanical and Manufacturing Engineering

“We want to understand what the fundamental causes for thermo-mechanical fatigue are, so we use the Gleeble to apply load and temperature, sometimes in sync and sometimes out of sync. The Gleeble can keep going for days, executing the same program again and again... it gives us excellent reproducibility.”

Dr. John Bowker

Former Senior Research Scientist CANMET Materials Technology Laboratory (CANMET-MTL)

"The Gleeble is one of the most heavily used machines at our lab... We have used and continue to use it for a broad range of thermo-mechanical simulation procedures. These include: welding applied to shipbuilding, marine materials, offshore structures and pipelines; compression testing to characterize the flow stress behavior of steels and aluminum alloys: and in situ melting and solidification to understand the effects of residuals on hot ductility."

Tom Schambron, Product Development Metallurgist

Bluescope Steel

…world research and innovation are cornerstones of our business - the Gleeble is key to meeting the objectives of BlueScope. It assists in product development and improvement—such as trialling new steel grades, processing parameters, and so forth—and in tracking and solving of quality issues.

Damien Fabrègue

The Institut National des Sciences Appliquées (National Institute of Applied Science) de Lyon, Villeurbanne, France

this is the only piece of equipment that I can do everything with. I can always do what I want. It may take some time to optimize the work, but in the end, you can always run the experiment or do the simulation that you wanted to do.

Dr. Brian Damkroger

Los Alamos National Laboratory

"Only the Gleeble is fast enough to allow us to physically simulate the thermal profile of electron beam welding”

Chihiro Kasamatsu

Material Evaluation Department Aichi Steel Corporation

“…we are concentrating on testing with the Gleeble to reduce costs in our forging production processes…”

Dr. Arnold Marder

Energy Research Center, Lehigh University

“What we are aiming at is intelligent processing. That’s where the Gleeble gives us a tremendous advantage. By allowing us to carefully simulate and model thermal and mechanical processes…”

Dr. Leijun Li

Utah State University

On the Gleeble we can not only control all the mechanical properties, but we’re in command of the thermal properties and the atmosphere. With the Gleeble, we can do complicated applications, watch what is happening, see the effect of temperature, and know how much energy is going in. It would take a lot more time and money to do it with equipment other than the Gleeble.

Dr. Luis A. Colembergue Klujszo

Gerdau Aços Especiais Piratini

Through the capability of simulating large scale, expensive processes in a small scale, laboratory environment, the Gleeble has made it easier for Gerdau to improve products and processes. Furthermore, all the controls available in the equipment bring a whole lot of reliability to the results, making the conclusions very sound.

Dr. Hirowo Suzuki

Nippon Steel (retired)

“In my opinion, Dynamic Systems is the top company in this kind of test equipment… worldwide.”

Dr. Warren Poole

University of British Columbia

"We had to generate all the parameters and then to validate the predictions that the computer model made… The Gleeble played a central role in that project. We did austenite grain growth studies, double-hit compression tests to study recrystallization, and continuous cooling transformations, with and without compression."

Careers